页面打开中,请稍候...
www.Gzu521.com
| GZU521.COM学习网 |
|
well i passed this test with a 82% hope my study tips and practice questions help!!?? don CCNA, MCSE 1. if you wanted to find out which commands where available that started with the letter “t” help t* help t? t ? t? ? t 2. type the command to instruct the router to load the ios from the file named "ios11.2.img" saved on flash? load boot flash ios.11.2.img boot system flash ios11.2.img load flash ios11.2.img run flash ios.11.2.img 3. identify the true statements (2) store and forward switching creates variable latency through the switch cut through switching creates variables latency through the switch store and forward switching works at wire speed cut through switching works at wire speed 4. choose the best answers: which of the following is the session layer concerned with? (2) managing exchanges of data between presentation layer entities flow control and windowing establishing, managing and and terminating sessions verifying data encoding formats 5. which isdn specification series deals with the concepts and terminology surrounding isdn? (1) i series q series e series there is no specific series 6. what does the command “cdp timer 150” do? gives cdp a administrative metric of 150 configures the rate at which cdp packets are sent changes the cdp hold down timer sets the cdp hold down timer to 150 7. which command would set the encrypted secret password to CISCO? enable secret cisco encrypt enable secret 5 cisco enable secret cisco enable-secret cisco enable password cisco 8. how can you get to user exec mode from the console? type “enable” type “config terminal” press the enter key on the keyboard press ctrl-z key on the keyboard 9. what two occurrences will reset the holddown timer after a triggered update? hd timer expires infinity is finally defined as some max number another update is received indicating net status changed another update is received indicating a better metric the router receives a processing task proportional to the number of links in the internetwork the router detects fault lsp’s propagating through the internetwork 10. what command displays ipx routing update packets received or transmitted between a router sh rip disp rip sh ipx route sh table ipx disp ipx route disp ipx routing activity debug ipx routing activity disp ipx interface activity 11. 3 statements describe default encapsulation and lmi type configuration. ietf encap must be configured unless the connecting routers are both cisco the lmi type config term options the default lmi is cisco in release 11.3 the lmi type is autosensed there are only four encapsulations and 3 lmi type options 12. which 3 commands will display the ipx address on int e0 sh ipx e0 sh ipx int disp ipx int sh int e0 |
责任编辑：gzu521
您现在的位置:
